- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi everyone,
I want to create a BLE Tag with a PSoC 4, and while I was checking the Find Me profile the actual current is 5 mA, but I want to use a coin cell battery so this current is too high if I want to use continously.
I want to implement Low Power modes (Sleep or Deep Sleep mode) but I don't know if the system advertises when it is in this modes.
Do you know how to reduce the power consumption and create my own Ble Tag
Regards
Solved! Go to Solution.
- Labels:
-
BLE
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Best will be to have a look into the examples coming with the CY8CKIT-042-BLE which you may download and install. Further examples are to be found in 100 Projects. There are deep sleep examples. Keep in mind that you can control the radio independent from the MPU.
Bob
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Best will be to have a look into the examples coming with the CY8CKIT-042-BLE which you may download and install. Further examples are to be found in 100 Projects. There are deep sleep examples. Keep in mind that you can control the radio independent from the MPU.
Bob