cancel
Showing results for 
Search instead for 
Did you mean: 

PSoC 4 MCU

Anonymous
Not applicable

Hi All,

   

I want to know that, Is it possible to connect more than one device via UART in PSOC 4 BLE (4200 series)

   

Looking forward  for your reply!

   

Regards

   

Awais

0 Likes
Reply
1 Solution
Anonymous
Not applicable

You can add two different SCB-based UART components to a project schematic when using this chip, and they can operate independently on different sets of pins. If you want to connect more than two UART devices, or you do not want to use multiple SCB components, then you will need to use an external UART MUX chip with GPIO-based routing selection. However, in this case, you would not be able to communicate with more than one UART device at a time.

View solution in original post

0 Likes
Reply
1 Reply
Anonymous
Not applicable

You can add two different SCB-based UART components to a project schematic when using this chip, and they can operate independently on different sets of pins. If you want to connect more than two UART devices, or you do not want to use multiple SCB components, then you will need to use an external UART MUX chip with GPIO-based routing selection. However, in this case, you would not be able to communicate with more than one UART device at a time.

View solution in original post

0 Likes
Reply