cancel
Showing results for 
Search instead for 
Did you mean: 

PSoC 4 MCU

Anonymous
Not applicable

Hello,

   

 

   

When using EZ-Serial firmware with CYBLE-212006-01, what is the state of the extended range feature ? The datasheet of the CYBLE (http://www.cypress.com/file/318881/download) describes a source code modification p15. Is it present in the EZ-Serial firmware ? Is there a command to enable or disable it ?

   

Thanks in advance

0 Likes
Reply
1 Solution
Anonymous
Not applicable

Hi Eric,

   

The extended range modifications are built into the EZ-Serial firmware and automatically enabled on any modules which support them. At the moment, there is no way to disable the behavior within EZ-Serial.

   

Jeff

View solution in original post

0 Likes
Reply
1 Reply
Anonymous
Not applicable

Hi Eric,

   

The extended range modifications are built into the EZ-Serial firmware and automatically enabled on any modules which support them. At the moment, there is no way to disable the behavior within EZ-Serial.

   

Jeff

View solution in original post

0 Likes
Reply