cancel
Showing results for 
Search instead for 
Did you mean: 

PSoC 4 MCU

Anonymous
Not applicable

Hi

   

I have some questions about EZ-BLE PRoC.

   

1. What is difference between EZ-BLE PRoC and EZ-BLE PSoC?
2. BLE-PRoC work with data rate of 1Mb/ps. Is it fixed data rate? Or PRoc can work by data rate less than 1Mbps?
3. How we can select the channel frequency of PRoC? Can we use different frequency band at same time ?

   

Thanking you in anticipation.

   

Best Regards.

0 Likes
1 Solution
AnjanaM_61
Moderator
Moderator

Hello,

   

1. What is difference between EZ-BLE PRoC and EZ-BLE PSoC?

   

PSoC BLE can used UDB components where as it is not present in PRoC devices. Please refer our FAQ points as well:

   

http://www.cypress.com/documentation/frequently-asked-questions/ble-frequently-asked-questions

   

2. BLE-PRoC work with data rate of 1Mb/ps. Is it fixed data rate? Or PRoc can work by data rate less than 1Mbps?

   

1Mbps is the maximum supported by PSoC/PRoC BLE 4.1 devices. It can be less as well depends upon your design.

   

 3. How we can select the channel frequency of PRoC? Can we use different frequency band at same time ?

   

BLE devices uses 2.4-GHz ISM1 band. It uses 3 advertising channels and 37 data channels as in the attached ppt.

   

If you want you can set particular channels among the available.

   

Thanks & Regards,
Anjana

View solution in original post

0 Likes
2 Replies
AnjanaM_61
Moderator
Moderator

Hello,

   

1. What is difference between EZ-BLE PRoC and EZ-BLE PSoC?

   

PSoC BLE can used UDB components where as it is not present in PRoC devices. Please refer our FAQ points as well:

   

http://www.cypress.com/documentation/frequently-asked-questions/ble-frequently-asked-questions

   

2. BLE-PRoC work with data rate of 1Mb/ps. Is it fixed data rate? Or PRoc can work by data rate less than 1Mbps?

   

1Mbps is the maximum supported by PSoC/PRoC BLE 4.1 devices. It can be less as well depends upon your design.

   

 3. How we can select the channel frequency of PRoC? Can we use different frequency band at same time ?

   

BLE devices uses 2.4-GHz ISM1 band. It uses 3 advertising channels and 37 data channels as in the attached ppt.

   

If you want you can set particular channels among the available.

   

Thanks & Regards,
Anjana

View solution in original post

0 Likes
Anonymous
Not applicable

I really appreciate your concern.Thanks alot.

0 Likes