cancel
Showing results for 
Search instead for 
Did you mean: 

PSoC 4 MCU

Anonymous
Not applicable

 Hello guys, I have a little doubt:

   

I planning to buy the CY8CKIT-042-BLE Pioneer Kit and I would know if I can use the BLE Pioneer Baseboard to program the Psoc 4 BLE Module and use this module (just the psoc 4 ble module) separated of the Baseboard in my application. I want to know if I have to use the Psoc 4 BLE module just with the Baseboard because in my application I have physical limitation and I want to use only the small components.

   

 

   

Sorry if it is a silly question.

   

 

   

Att,

0 Likes
4 Replies
JoMe_264151
Expert II

You can get the PSoC4 BLE module separately and you just have to provide power to let the programmed module work. Have a look at the specs.

   

 

   

Bob

0 Likes
Anonymous
Not applicable

Thanks for replying, bob! But I need the baseboard to program the module, right?

   

 

   

 

   

att,

0 Likes
Anonymous
Not applicable

 You can use miniprog3 and connect the SWD lines of module to program PSOC4 BLE

0 Likes
JoMe_264151
Expert II

You need a programmer to program the module. Full stop.

   

There are some different choices:

   

The KIT-baseboard. Plugs and sockets are not layed out for too often usage, so good for prototyping.

   

A separate KitProg: Snap-off part of the CY8CKIT-059. Can be connected with a cable.

   

MiniProg3: The professional solution. Target can be powered by MiniProg3 with 3.3V or 5V

   

 

   

Bob

0 Likes