cancel
Showing results for 
Search instead for 
Did you mean: 

PSoC 4 MCU

Anonymous
Not applicable

I would like to know if in the PSoC® 4 BLE  if the host part could be disable and use the device just as a BLE controller (Link Layer only). I have a host in a second device and it expects to communicate with the controller via HCI.

0 Likes
Reply
1 Solution
Anonymous
Not applicable

Yes.

   

Use the DTM mode from the BLE Component. The controller can then be accessed over UART using the HCI commands. The PSoC_4_BLE_DTM/PRoC_BLE_DTM example projects in the BLE Pioneer kit content (www.cypress.com/CY8CKIT-042-BLE) demonstrates this. Refer the user guide of the kit for more details.

View solution in original post

0 Likes
Reply
1 Reply
Anonymous
Not applicable

Yes.

   

Use the DTM mode from the BLE Component. The controller can then be accessed over UART using the HCI commands. The PSoC_4_BLE_DTM/PRoC_BLE_DTM example projects in the BLE Pioneer kit content (www.cypress.com/CY8CKIT-042-BLE) demonstrates this. Refer the user guide of the kit for more details.

View solution in original post

0 Likes
Reply