cancel
Showing results for 
Search instead for 
Did you mean: 

PSoC 4 MCU

Contributor

Hi,

   

What is the correct Vcc value to be applied during programming of the IC via SWD?

   

We are using the MPQ 4-port programmer which requires the user to provide power to the IC. The programming spec document does not appear to contain this info.

0 Likes
Reply
1 Solution
Esteemed Contributor II

You may use 1.8 to 5V supply. Quite flexible.

   

 

   

Bob

View solution in original post

0 Likes
Reply
1 Reply
Esteemed Contributor II

You may use 1.8 to 5V supply. Quite flexible.

   

 

   

Bob

View solution in original post

0 Likes
Reply