cancel
Showing results for 
Search instead for 
Did you mean: 

PSoC 4 MCU

Contributor

I am trying to run the cap sense tuner but all the pins on my board design are used up for other things.  Its there a way to interface the tuner to the pins of my MiniProg3 I am using to program the device.

Thanks

Scott

0 Likes
Reply
1 Solution
Moderator
Moderator

If you want to acquire and display the capsense parameter, you must have the interface.

View solution in original post

0 Likes
Reply
3 Replies
Moderator
Moderator

Hi Scott,

What is the MPN of the device you used?

If all the pins are used, there is only way to use the BLE to send out your tuner data.

0 Likes
Reply
Contributor

The MPN is CY8C4045AZI-S413

Thanks

Scott

0 Likes
Reply
Moderator
Moderator

If you want to acquire and display the capsense parameter, you must have the interface.

View solution in original post

0 Likes
Reply