- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello together,
during my first experiences with the CY8CKIT-042 Pioneer Kit i worked with example projects like the one with the linear slider.
I also tried some variations by using only one of the slider elements as a button.
Starting the Tuner always worked well.
But now i started to work with the CY8CKIT-024 CAPSENSE PROXIMITY SHIELD in addition. I use the example projects from the following Cypress product page:
http://www.cypress.com/documentation/application-notes/an92239-proximity-sensing-capsense
Doesn't matter which example project i try (i only use the ones that are named with 0042), none of them lets me work with the Tuner. The tuner always throws:
"Read operation failed! Ceck I2C connection".
All my settings of the EzI2C SCB block exactly match the document AN92239, which is also to be found on the link i mentioned before.
Updating components, Building and Flashing were working well ( I'm using PSoC creator 4.1).
Is there any setting that i may could have forget?
Thanks a lot!
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
You need to set the macro "Tuner Enable" to 1, to use the tuner.
When tuner is enabled, the LED control does not work because we enter a indefinite loop:
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
You need to set the macro "Tuner Enable" to 1, to use the tuner.
When tuner is enabled, the LED control does not work because we enter a indefinite loop:
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Wow thanks a lot man!