cancel
Showing results for 
Search instead for 
Did you mean: 

PSoC 4 MCU

GaFe_4682661
New Contributor

Dear All,

Is it possible somehow to use this sensor for IOT purposes?

CY8CKIT-022 CapSense® Liquid Level Sensing Shield

https://www.cypress.com/documentation/development-kitsboards/cy8ckit-022-capsense-liquid-level-sensi...

I have the CapSense shield and PSoC4 development kit.

I like to send the liquid measurement data from multiple liquid storages equiped with CapSense and PSoC4 into a central computer.

Do you have any recommendation for this? Is using Raspberry Pis together with the Capsense and PSoC4 devices can be a solution?

Thank you in advance and look forward to your feedback,

Gabor

0 Likes
1 Solution
BragadeeshV
Moderator
Moderator

Hi GaFe_4682661​,

If you are looking for a WiFi solution with CapSense, we recommend you to use PSoC 6 WiFi BT pioneer kit.

You can use PSoC 6 to interface with the CY8CKIT-022 CapSense® Liquid Level Sensing Shield and the on-board Murata LBEE5KL1DX Module (CYW4343W WiFi + BT Combo Chip) for WiFi connectivity.

We recommend using Modus Toolbox software for development.

If you want to continue with PSoC 4 for CapSense, you can use the PSoC 4 chip and integrate it with any WiFi module (such as Raspberry Pi) as a solution.

Regards,

Bragadeesh

Regards,
Bragadeesh

View solution in original post

0 Likes
3 Replies
BragadeeshV
Moderator
Moderator

Hi gafe_4682661​,

Could you please let us know if you are looking for a BLE/ BT/ WiFi connectivity? We might be able to suggest you the best solution based on your requirement.

Regards,

Bragadeesh

Regards,
Bragadeesh
0 Likes
GaFe_4682661
New Contributor

Hi BragadeeshV_41

I am mainly looking for a solution with WiFi connectivity.

Thank you in advance,

Gabor

0 Likes
BragadeeshV
Moderator
Moderator

Hi GaFe_4682661​,

If you are looking for a WiFi solution with CapSense, we recommend you to use PSoC 6 WiFi BT pioneer kit.

You can use PSoC 6 to interface with the CY8CKIT-022 CapSense® Liquid Level Sensing Shield and the on-board Murata LBEE5KL1DX Module (CYW4343W WiFi + BT Combo Chip) for WiFi connectivity.

We recommend using Modus Toolbox software for development.

If you want to continue with PSoC 4 for CapSense, you can use the PSoC 4 chip and integrate it with any WiFi module (such as Raspberry Pi) as a solution.

Regards,

Bragadeesh

Regards,
Bragadeesh

View solution in original post

0 Likes