Nor Flash Forum Discussions
text.format{('custom.tabs.no.results')}
Hello,
We have three kinds of NOR flash device with "GL512N10FAI01" ordering part number. All devices that have "821BB437 T" and "0911VVF JJ" product date codes work properly on the card. However, devices which have "824BB509 Q" product date code do not work properly on the same card. If I need to detail the problem, we cannot write/read 8bit of 16bit Data bus of NOR flash. We could send you a sample to investigate it. This wafer lot sequence may be problematic. We need to maintain production. Although we have a lot of this devices, we have stopped the production since the devices became obsolete. Could you help us?
By the way, "0911VVF JJ" fits "YY WW A B C" product date code format in https://www.cypress.com/file/294586/download (page 11) document, but its product year(2009) is not prior to third quarter 2007. There is a conflict in marking format document.
Thanks.
Show LessHello,
I've been having trouble trying to locate the 3D Model for S25FL128LAGMFM010. Is there anywhere I should look on the Cypress site to find this? I'm mainly looking for a file that would be compatible with Solidworks.
Thanks,
Aidan
To protect sector,
After writing 1 with DYB WRITE COMMAND, DYB STATUS is read to perform Verify.
DYB STATUS can be read correctly.
After that, it does not return to READ MODE.
how to return to read mode?
Regards,
Takenari
Show LessI consider thermal analysis for my circuit using S29AL016J70T (TSOP 48pin package) .
I would like to confirm thermal resistance value of junction to case for S29AL016J70T.
Regards
Show LessHi all,
I've downloaded standard code from Cypress page for NOR-Flash programming.
https://www.cypress.com/documentation/code-examples/ce220823-psoc-6-mcu-smif-memory-write-and-read-operation
Reconfigured successfully to my Processor which is CY8C6347FMI-BLD53T.
Reconfigured with my modified cymem file for S25FL064L NOR-Flash (see attached and also image below).
Getting all 0xFF on reading.
FAIL: Read data does not match with written data. Read/Write operation failed.
Error Code: 0xFFFFFF01
Error Code:
0xFFFFFF01
Please advise what is wrong.
With my other code I was able to read ID and Erase and Read chip in quad mode, but with same outcome. After programming all reading FFs.
Same code running on EV board was able to correctly program S25FL512S memory.
Hi Sirs,
Please help to find alternative parts for replacement.
Description |
IC FLASH (R2HF) MX25L1006EMI-10G SOP-8 1MX1/512KX2 2.7~3.6V SPI INDUSTRIAL MXIC |
IC FLASH (R3HF) W25Q32JVSSIQ SOIC-8 32MX1 2.7~3.6V SPI INDUSTRIAL WINBOND |
Thanks,
Leon 8/18
Show Less