Announcements
IMPORTANT: Cypress Developer Community is transitioning on October 20th. To learn more and be prepared for this change, check out our latest announcement.
cancel
Showing results for 
Search instead for 
Did you mean: 

Nor Flash

Yukitaka
New Contributor

I think the difference between S29AL016J70TFI010 and S29AL016J70TFI020 is the difference between top boot sector device and bottom boot sector device. Is there any revision required when using S29AL016J70TFI010 when using S29AL016J70TFI020?

0 Likes
1 Solution
AlbertB_56
Employee

Hello Yukitaka,

Yes, you are correct.  You should be able to use  either model 01 or model 02, without  any problems.  However, please do keep in mind that the Device ID's are different. 

S29AL016J70TFI01x : model '01' = VCC = 2.7 - 3.6V, top boot sector device (CFI Support)
S29AL016J70TFI02x : model '02' = VCC = 2.7 - 3.6V, bottom boot sector device (CFI Support)

 

Best regards,

Albert

Cypress Semiconductor Corp.

An Infineon Technologies Company

View solution in original post

0 Likes
4 Replies
AlbertB_56
Employee

Hello Yukitaka,

Thank you for contacting Cypress Semiconductor Corp.

There is no revision that is required when using the S29AL016J70TFI010, when using S29AL016J70TFI020.

However, please do keep in mind that the device ID's are different between top boot and bottom devices.

The S29AL016J datasheet is attached for your reference and review.

S29AL016J70TFI01x : model '01' = VCC = 2.7 - 3.6V, top boot sector device (CFI Support)
S29AL016J70TFI02x : model '02' = VCC = 2.7 - 3.6V, bottom boot sector device (CFI Support)

 

Best regards,

Albert

Cypress Semiconductor Corp.

An Infineon Technologies Company

0 Likes
Yukitaka
New Contributor

Thank you for your reply. It seems that it can be used without problems.

0 Likes
AlbertB_56
Employee

Hello Yukitaka,

Thank you for contacting Cypress Semiconductor Corp.

There is no revision that is required when using the S29AL016J70TFI010, when using S29AL016J70TFI020.

However, please do keep in mind that the device ID's are different between top boot and bottom devices.

The S29AL016J datasheet is attached for your reference and review.

S29AL016J70TFI01x : model '01' = VCC = 2.7 - 3.6V, top boot sector device (CFI Support)
S29AL016J70TFI02x : model '02' = VCC = 2.7 - 3.6V, bottom boot sector device (CFI Support)

 

Best regards,

Albert

Cypress Semiconductor Corp.

An Infineon Technologies Company

0 Likes
AlbertB_56
Employee

Hello Yukitaka,

Yes, you are correct.  You should be able to use  either model 01 or model 02, without  any problems.  However, please do keep in mind that the Device ID's are different. 

S29AL016J70TFI01x : model '01' = VCC = 2.7 - 3.6V, top boot sector device (CFI Support)
S29AL016J70TFI02x : model '02' = VCC = 2.7 - 3.6V, bottom boot sector device (CFI Support)

 

Best regards,

Albert

Cypress Semiconductor Corp.

An Infineon Technologies Company

View solution in original post

0 Likes