Strictly necessary cookies are on by default and cannot be turned off. Functional, Performance and Tracking/targeting/sharing cookies can be turned on below based on your preferences (this banner will remain available for you to accept cookies). You may change your cookie settings by deleting cookies from your browser. Then this banner will appear again. You can learn more details about cookies HERE.
Strictly necessary (always on)
Functional, Performance and Tracking/targeting/sharing (default off)
We have been using the S25FL164K0XB on one of our products for years.
We have made several batches.
No changes have been made to production setup, electronics (PCB, schem, BOM etc) or to bootloader and firmware.
However on the latest batch of this product roughly 1/3 of produced units failed to properly boot after being flash with firmware.
multiple x-rays and quality checks have been made on PCB.
We had production change the flash on 20 failing units and then reprogram. After this 17 passed and 3 failed.
We got our S25FL from trusted supplier, but we also tryed ordering a new batch from another supplier (digi-key) and now tried the same test again: 20 failed units, replace flash. Result 16passed 4 failed.
Could be a timing issue.
However what boggles me is, we have changed nothing from older batches to now.
Have there been a change or some errata to the S25FL164, and where do i find information about this?
Q) Have there been a change or some errata to the S25FL164, and where do i find information about this?
A) There is no errata associated with this part. I have checked our internal database also and did not find any errata. For your information if at all there is errata related to device it will be mentioned in the datasheet under Errata section.
Incase if you are going for new designs please note that it is Not Recommended for New designs (NRND).
Can you tell me from how long you are using these boards. As you mentioned it could be timing issues. Are you programming using third party programmers or In system programming.?