Non Volatile RAM (F-RAM & NVSRAM) Forum Discussions
I'm not getting data returned back from the FRAM chip when I send a read request or RDID request.
I'm not sure what I'm doing wrong.
I've attached my wave forms of HOLD_N, CS_N, serial data out of FRAM, serial data into FRAM, CLK, WP_N.
Any help would be appreciated.
Show LessThe website lists the reflow temperature as 220°, but the data sheet lists it as 260°. Is 260° correct?
CY14B101J2-SXIT
https://www.infineon.com/cms/jp/product/memories/nvsram-non-volatile-sram/cy14b101j2-sxit/
データシート
Show Less
Please can you share the part number for this top marking CY152B3. In community response i see both CY15B102QN-50SXE & CY15B104QSN-108SXI are with same top marking. Where can i find this top marking description in datasheet.
Show LessIs there any command or method to batch erase regarding the non-volatile part of NvSRAM?
Although it is OK to perform clear (WRITE) processing from the upper CPU to all addresses,
However, with an access time of 45ns, it would take several tens of ms to clear all 16Mbit addresses, so I was wondering if there is a process that can clear all addresses in one shot.
We would appreciate your confirmation.
I perchased the parts of CY15B108QN-40SXI, but the marking of them is “CY153D3”. We doubt that we received wrong parts.
Pls help to check that, thank you.
Show LessHello,
I am looking for a software which writes data to FRAM (FM25V20A-G) from PC. Can FLASH USB Programmer New 8FX work for FRAM also? If it doesn't, is there any software I can use?
Thank you
Show LessI want to find a drop-in replacement for FM25L04B because it has errata in writing procedure, I changed it to FM25CL64B but it does not work. any advice?
Thanks
Farah
Show LessI'm encountering a problem with my Code Composer Studio (CCS) project, specifically related to incorrect data storage and retrieval in FRAM. I have global variables declared as int16
in my code, and I'm consistently using int16
data types throughout. However, when I store and retrieve these variables in FRAM, the data appears to be getting corrupted or misinterpreted. Here are the key details:
- I'm using a specific range of memory addresses for FRAM storage, including 0x380000.
- The FRAM hardware I'm using is an FM18W08, with a capacity of 32 kilobytes by 8 bits.
I'm utilizing the FM18W08 for data storage and examining the stored variables within the Code Composer Studio (CCS) expression window. My hardware is the F28388D DSP (CPU1). I've enabled the chip select (CS) functionality using a memory address, employing the SN74LVC138A 3-Line to 8-Line Decoders/Demultiplexers. Specifically, I've utilized EMIF1 CS4n to trigger the SN74LVC138A, and CS4n covers a memory address range spanning from 0x380000 to 0x3DFFFF.
Within this address range, I've allocated addresses from 0x390000 to 0x3D0000 for other purposes within the code. Starting at memory address 0x380000 and defining a length of 0x008000, I've successfully stored data ranging from 0 to 255. However, when attempting to store values outside of this range, the data interpretation appears to be incorrect.
To illustrate this issue further, let's consider three global variables: 'a,' 'b,' and 'c.' Initially, 'a' is assigned the value 3, 'b' is assigned -3, and 'c' is assigned 260. However, upon storage and retrieval, 'a' retains its value of 3, 'b' appears to be interpreted as 253, and 'c' is read as 4.
I've checked my code, and everything seems to be in order, yet the issue persists. Can you please provide guidance on how to troubleshoot and resolve this problem? Are there any known considerations or settings I should be aware of when working with int16
data types and FRAM in CCS? Your expertise would be greatly appreciated. Thank you!"
I know that this product has a temperature requirement of max 85°, but is there any way to guarantee that it can be used up to 105°?
If so, please let me know the conditions.
Hello,
We are using the NVSRAM CY14B101PA-SFXI over the SPI protocol in Linux.
The Linux kernel version is 5.10.9.
Required the drivers for NVSRAM CY14B101PA-SFXI.
Please share the drivers.
Thank you
Show Less