- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
After import the blink demo from Mbed to MTB, it could success compile but fail to program.
The same as another capsense demo.It could success in Mbed but the same fail in MTB.
All the steps are the same as user guide.
Here's the fail details, looks something config not complete?The board is CY8CKIT_062_WIFI_BT.
0000937:WARNING:common:STLink and CMSIS-DAPv2 probes are not supported because no libusb library was found.
0000939:INFO:board:Target type is cy8c6xx7
0000986:INFO:dap:DP IDR = 0x6ba02477 (v2 rev6)
0001006:INFO:ap:AP#0 IDR = 0x84770001 (AHB-AP var0 rev8)
0001023:INFO:ap:AP#1 IDR = 0x84770001 (AHB-AP var0 rev8)
0001041:INFO:ap:AP#2 IDR = 0x24770011 (AHB-AP var1 rev2)
0001061:INFO:rom_table:AP#0 ROM table #0 @ 0xf1000000 (designer=034 part=100)
0001077:INFO:rom_table:AP#1 ROM table #0 @ 0xf0000000 (designer=034 part=100)
0001087:INFO:rom_table:[0]<e00ff000:ROM class="1" designer=43b part=4c0>
0001087:INFO:rom_table: AP#1 ROM table #1 @ 0xe00ff000 (designer=43b part=4c0)
0001097:INFO:rom_table: [0]<e000e000:SCS-M0+ class="14" designer=43b part=008>
0001105:INFO:rom_table: [1]<e0001000:DWT-M0+ class="14" designer=43b part=00a>
0001111:INFO:rom_table: [2]<e0002000:BPU class="14" designer=43b part=00b>
0001118:INFO:rom_table:[1]<f0002000:CTI class="9" designer=43b part=9a6 devtype=14 archid=1a14 devid=0:0:1040800>
0001127:INFO:rom_table:[2]<f0003000:MTB-M0+ class="9" designer=43b part=932 devtype=31 archid=0a31 devid=0:0:0>
0001138:INFO:rom_table:AP#2 ROM table #0 @ 0xe00ff000 (designer=034 part=100)
0001149:INFO:rom_table:[0]<e0080000:CTI class="9" designer=43b part=906 devtype=14 archid=0000 devid=0:0:40800>
0001154:INFO:rom_table:[3]<e008e000:TPIU-M3 class="9" designer=43b part=923 devtype=11 archid=0000 devid=0:0:ca1>
0001161:INFO:rom_table:[4]<e007f000:ROM class="1" designer=034 part=100>
0001161:INFO:rom_table: AP#2 ROM table #1 @ 0xe007f000 (designer=034 part=100)
0001174:INFO:rom_table: [0]<e000e000:SCS-M4 class="14" designer=43b part=00c>
0001180:INFO:rom_table: [1]<e0001000:DWT class="14" designer=43b part=002>
0001187:INFO:rom_table: [2]<e0002000:FPB class="14" designer=43b part=003>
0001194:INFO:rom_table: [3]<e0000000:ITM class="14" designer=43b part=001>
0001203:INFO:rom_table: [4]<e0042000:CTI class="9" designer=43b part=906 devtype=14 archid=0000 devid=0:0:40800>
0001210:INFO:rom_table: [5]<e0041000:ETM-M4 class="9" designer=43b part=925 devtype=13 archid=0000 devid=0:0:0>
0001213:ERROR:gdb_server:uncaught exception: 'CY8C6xx7' object has no attribute 'options'
Traceback (most recent call last):
File "c:\python27\lib\site-packages\pyocd\tools\gdb_server.py", line 287, in run
with session:
File "c:\python27\lib\site-packages\pyocd\core\session.py", line 287, in __enter__
self.open()
File "c:\python27\lib\site-packages\pyocd\core\session.py", line 367, in open
self._board.init()
File "c:\python27\lib\site-packages\pyocd\board\board.py", line 83, in init
self.target.init()
File "c:\python27\lib\site-packages\pyocd\core\coresight_target.py", line 158, in init
seq.invoke()
File "c:\python27\lib\site-packages\pyocd\utility\sequencer.py", line 201, in invoke
resultSequence = call()
File "c:\python27\lib\site-packages\pyocd\target\builtin\target_CY8C6xx7.py", line 221, in create_cy8c6xx7_core
core0 = CortexM_CY8C6xx7(self, self.aps[1], self.memory_map, 0)
File "c:\python27\lib\site-packages\pyocd\coresight\cortex_m.py", line 409, in __init__
Target.__init__(self, session, memoryMap)
File "c:\python27\lib\site-packages\pyocd\core\target.py", line 98, in __init__
self.halt_on_connect = session.options.get('halt_on_connect')
AttributeError: 'CY8C6xx7' object has no attribute 'options'
-Thanks for your support.
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
What is the version of Python and PyOCD installed? Ensure that you have Python 2.7.9 or later and PyOCD 0.16.1 or later. Download libusb from here and place the DLL in your Python installation folder next to python.exe. Make sure to use the same 32- or 64-bit architecture as your Python installation
Regards,
Dheeraj
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Please refer to the "Mbed OS to ModusToolbox Flow" section in the ModusToolbox user guide present at this link: https://www.cypress.com/file/455211/download. Let me know if you are able to program using the DAPLink mode.
Regards,
Dheeraj
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Dheeraj,
I have followed this guide to build success but meet error, AttributeError: 'CY8C6xx7' object has no attribute 'options',when execute program.
Look like something missing in CY8C6xx7.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
What is the version of Python and PyOCD installed? Ensure that you have Python 2.7.9 or later and PyOCD 0.16.1 or later. Download libusb from here and place the DLL in your Python installation folder next to python.exe. Make sure to use the same 32- or 64-bit architecture as your Python installation
Regards,
Dheeraj