cancel
Showing results for 
Search instead for 
Did you mean: 

ModusToolbox Bluetooth SDK

cera_4813796
New Contributor

Hello
I have a cybt-213043eval and a cybt-213043-mesh board
I want to know how I can load the examples of Modus Tool box, Empty_213043EVAL, Empty_213043EMESH, Hello sensor etc etc on the 2 cards instead of OTA or another way that does not use UART

0 Likes
1 Solution
AnjanaM_61
Moderator
Moderator

Hello,

For first time programming , you need to use HCI UART interface. There is no other option. 

If you enable OTA in the application loaded via HCI UART, then next time you can use OTA for FW upgrade.

Regards,

Anjana

View solution in original post

0 Likes
4 Replies
AnjanaM_61
Moderator
Moderator

Hello,

For first time programming , you need to use HCI UART interface. There is no other option. 

If you enable OTA in the application loaded via HCI UART, then next time you can use OTA for FW upgrade.

Regards,

Anjana

View solution in original post

0 Likes
cera_4813796
New Contributor

very good, already load the example: ota_firmware_upgrade, through hci uart
but now I want to load the empty code, or hello sensor, or beacon etc etc
how can I do this?
What are the steps?

0 Likes
cera_4813796
New Contributor

very good, already load the example: ota_firmware_upgrade, through hci uart
but now I want to load the empty code, or hello sensor, or beacon etc etc
how can I do this?
What are the steps?

0 Likes
DheerajPK_41
Moderator
Moderator

Hi,

Due to technical glitch in the community, I think we missed your query.  Sorry for the inconvenience caused. 

 

For OTA upgrade, you can collect the "__.ota.bin" after building the application from the SDK (.ota.bin file will be available inside build folder) and use any OTA peer app (https://github.com/cypresssemiconductorco/btsdk-peer-apps-ota) to do the upgradation. 

 

Make sure that the chip is already having a firmware which can accept the OTA (eg. ota_firmware_upgrade).

 

Thanks,

-Dheeraj

0 Likes