We are using the MCU - MB96F6B5RBPMC-GSE1 for an automobile application.
It is to be programmed using the USART1 interface.
Please let me know which serial programmer should be used.
We don't need a debugger.
Solved! Go to Solution.
You may have a look at this - https://www.cypress.com/documentation/software-and-drivers/flash-mcu-programmer-1
The part MB96F6B5RBPMC-GSE1 you are using belongs to "F2MC-16FX" family.
You may have a look at this - https://www.cypress.com/documentation/software-and-drivers/flash-mcu-programmer-1
The part MB96F6B5RBPMC-GSE1 you are using belongs to "F2MC-16FX" family.