Microcontrollers Forum Discussions
Browse the Community
PSoC™ 6
Discussion forum regarding PSoC™ 6 - 32-bit Arm Microcontroller (MCU) Forum, discusses the 40-nm technology - best combination of ultra-low-power consumption, flexibility, security and high-performance topics.
PSoC™ 4
PSoC™ 4 - Arm®-based Forum, discusses the low-power Cortex®-M0 and Cortex®-M0+ cores, CapSense®, and Bluetooth® Low Energy
PSoC™ 5, 3 & 1
The PSoC™ 5LP, PSoC 2 and PSoC 1 Forum discusses - 24-bit Digital Filter Block (DFB), 24 UDBs, DMA controller and integrating AFE, digital logic with user interface ICs with an Arm Cortex-M3 CPU solutions.
CAPSENSE™ & MagSense
The Sensing Technology Forum discusses CAPSENSE™ - capacitive-sensing and MagSense inductive-sensing for consumer, industrial, automotive, and Internet of Things (IoT) applications.
XMC™
AURIX™
In this forum you can post your questions, comments and feedback about the 32-bit AURIX™ TriCore™ Microcontroller. The AURIX™ offers the highest scalability in performance, memory & peripherals across application. It is a safe and secure companion chip, meeting both the ISO functional safety standards and EVITA full security standards. Here you can also find the links to the latest board pages, SW and Tools GitHub, trainings, documents and FAQs
TRAVEO™ T2G
Discussion forum regarding 32-bit TRAVEO™ T2G Microcontroller - based on ARM® for automotive body electronics applications; cutting-edge performance, safety, and security features topics.
MOTIX™ MCU
The MOTIX™ MCU forum is designed for you to post your questions, comments and feedback about the famous Embedded Power ICs at anytime. Ask your technical questions or explore existing content!
Legacy microcontrollers
Featured Discussions
LE9867QXA40XUMA2和LE9867QXA40XUMA3有什么区别?它们的功能和性能一样吗?A2和A3是什么意思?设计步骤(BF、UI)和设计步骤(UH)具体代表什么?我们可以扩展一下吗?我们使用这款产品LE9867QXA40XUMA3,发现在刻录过程中出现闪烁现象。是什么原因?当我们以前使用LE9867QXA40XUMA2时,没有问题。这个异常与A2和A3有关吗?如果我以前用的是这个型号TLE9879QXW40XUMA2,现在换成这个型号,用TLE9879QXW40XUMA3可以吗?我需要改变设计吗?程序软件应该如何操作?
Show Less
Hi,
Above example was very helpful to do board to board CAN communication using CAN0, node0 to CAN0, node0
using pins
Example_Pins.txPin= &IfxCan_TXD00_P20_8_OUT;
Example_Pins.rxPin= &IfxCan_RXD00B_P20_7_IN;
I was trying to use CAN0, node1 to CAN0, node1 using following pins
Example_Pins.txPin= &IfxCan_TXD01_P14_0_OUT;
Example_Pins.rxPin= &IfxCan_RXD01B_P14_1_IN;
I changed the line
g_mcmcan.canNodeConfig.nodeId = IfxCan_NodeId_0;
to
g_mcmcan.canNodeConfig.nodeId = IfxCan_NodeId_1;
But CAN is not working for CAN0, Node1 to CAN0, node-1.
Will be helpful if can get any suggestions.
Show Less
How to select a project as active debug when DAVE opens multiple projects?
smartconx_target@Q!w2e3r4t5y6u7i8o9p0||/t5/XMC/active-debug/td-p/723640
Show Less<Question>
Does the Supervisory region (SFlash) area of CYT4BF support ECC?
If it support ECC,
Are the registers that control ECC common to FLASHC/FLASHC1_FLASH_CTL.MAIN_ECC_EN ?
(Please see T2G-B-H Architecture TRM,8.2.2.5 Code Flash ECC, Table 8-6. Flash ECC Enable Registers)
If it does not support ECC,
Please tell me why it is not support with ECC.or Is there any other monitoring function?
Thank you for your support.
<質問>
CYT4BFのSFlash領域はECCに対応していますでしょうか?
ECCに対応している場合、
8.2.2.5 Code Flash ECCに記載の、FLASHC/FLASHC1_FLASH_CTL.MAIN_ECC_ENのようなECCを制御するレジスタはありますでしょうか?
(T2G-B-H Architecture TRM, Table 8-6. Flash ECC Enable Registers参照)
・ECCに対応していない場合、
ECCに対応していない理由を教えてください。もしくはECC以外の監視機能はありますでしょうか?
よろしくお願い致します。
Show Less[HTML]CPU code execution is switched from Flash to PSPR RAM. Flash modules are
deactivated via FCON register.[/HTML]
There are no information about PSPR RAM register or how to switch this execution.
How can i do it ?
I work on Tc222L Show Less
Hello,
The Bootloader is defined as Dual-Application.
I want to upgrade the image applications through UART and cyflash.
Upgrading of the Application1 (the valid and active) is failed with the message from cyflash:
The application is currently marked as active or golden image
Can you please advise what should I perform to upgrade the Applications in Dual-Application configuration through cyflash?
I use the product CY8C4247AZI-M485.
Thanks in advance.
Yacob.
Show Less
Dear Team,
I am using the sequencer for analog input reading, just want to know what is difference between interrupt method and sequencer method for ADC1 reading?
Show Less
Hello dear infineon frends,
I currently have a problem with the Tricore from Infineon. The controller is currently being used in series production. Some controllers do not start after a reset. When I connect to the debugger/JTAG and execute the debug software reset, the application starts normally. If I do a hardware reset, the controller hangs.
I have compared working controller with the faulty controller. Working controller starts after "Idle mode" → "Normal mode". Faulty controller starts after "Idle mode" → "Sleep mode". Can you perhaps give me a tip on what I should look for? What is the reason for this problem?
Many thanks in advance
Greetings
Alexander
-
TraveoII
UART buadrate Setting
by chandan1995 Jun 19, 2023