Showing results for 
Search instead for 
Did you mean: 

Knowledge Base Articles

eCERA - Crystal - 12MHz +/- 30ppm

Not applicable

eCERA - Crystal - 12MHz +/- 30ppm

Question: Do you have any crystal that have been tested with the CYRF6936 devices?



Yes, the GF1200008 which is an HC49SMD crystal has been used in our CY3630 EVK modules.  Please see data sheet below.  There are also an alternatives package option.

A 12-MHz crystal (30-ppm or better) is directly connected between XTAL and GND without the need for external capacitors.  A digital clock out function is provided, with selectable output frequencies of 0.75-, 1.5-, 3-, 6-, or 12-MHz. This output may be used to clock an external microcontroller (MCU) or ASIC. This output is enabled by default, but may be disabled.  Below are the requirements for the crystal to be directly connected to XTAL pin and GND:

  Nominal Frequency: 12 MHz

  Operating Mode: Fundamental Mode

  Resonance Mode: Parallel Resonant

  Frequency Initial Stability: ?30 ppm

  Series Resistance: <60 ohms

  Load Capacitance: 10 pF

  Drive Level: 10 ?W?100 ?W

Version history
Revision #:
1 of 1
Last update:
‎Dec 19, 2008 12:00 AM
Updated by: