cancel
Showing results for 
Search instead for 
Did you mean: 

Knowledge Base Articles

Using an External 32KHz Oscillator

Anonymous
Not applicable

Using an External 32KHz Oscillator

Question: Is it possible to drive the PSoC with an external 32KHz Oscillator?

 

Answer:

Yes, you can run an external oscillator into the crystal input. The range of the amplitude into the input needs to be between 0.6V and 1.8V. Therefore, if you run the standard TTL oscillator with an output from 2.4V to 5V through a resistor divider to knock it down by two-thirds, the PSoC oscillator will work just fine.

0 Likes
Version history
Revision #:
1 of 1
Last update:
‎Dec 19, 2008 12:00 AM
Updated by:
Anonymous
 
Contributors