cancel
Showing results for 
Search instead for 
Did you mean: 

Knowledge Base Articles

Updating Firmware in Clock Kits – KBA220548

chaitanyav_41
Employee

Updating Firmware in Clock Kits – KBA220548

Version: **

Translation - Japanese: クロックキットのファームウェア更新 - KBA220548 - Community Translated (JA)

Question:

How do I update the KitProg firmware?

Answer

Do the following to update the firmware

  1. Close the ClockWizard software if it is open in your system.
  2. Open the PSoC® Programmer™ software (Start > .All Programs > Cypress > PSoC Programmer 3.27 > PSoC Programmer 3.27. Cypress recommends that you use the the latest version of PSoC Programmer.)

    The settings should look like Figure 1:

    Figure 1
    pastedImage_112.png
    This displays a firmware update warning (see Figure 2) when the settings are as per the previous snapshot, and you click the “KitProg/…” text at the top left corner.

    Figure 2
    pastedImage_115.png

  3. Click OK to close the window
  4. To update the KitProg, go to the Utilities tab on PSoC Programmer and click Upgrade Firmware, as shown in Figure 3.
    Figure 3
    pastedImage_119.png
  5. Click Upgrade Firmware. This updates the KitProg firmware.
    pastedImage_120.png
0 Likes
Version history
Revision #:
1 of 1
Last update:
‎Dec 13, 2017 10:50 PM
Updated by:
 
Contributors