cancel
Showing results for 
Search instead for 
Did you mean: 

Knowledge Base Articles

Typical avergae current for capsense using sleep/wake up

Anonymous
Not applicable

Typical avergae current for capsense using sleep/wake up

Answer:

Question: What is the typical average for CapSense using sleep/wake up method?

Response: With a supply voltage of 3.0V, an average current of less than 50uA is possible using the Sleep/Wake-up option for PSoC. The 50uA current is achieved by scanning 8 sensors in one go and then sleeping for 100ms in between the scans.

0 Likes
Version history
Revision #:
1 of 1
Last update:
‎Jun 08, 2009 01:23 PM
Updated by:
Anonymous
 
Contributors