cancel
Showing results for 
Search instead for 
Did you mean: 

Knowledge Base Articles

Shutting the FX2 IFCLK external source off

Anonymous
Not applicable

Shutting the FX2 IFCLK external source off

Question: If IFCLK is external, can it be stopped (held low) at any point? For example when there is no activity on the slave FIFO interface (external master not accessing the FIFO interface).

 

Answer:

The minimum frequency of IFCLK is 5 MHz. If you can be assured there is no communication with the host that would affect the slave fifos (ep2/4/6/8 transactions), then you can disregard this minimum and shut the clock off.
 

0 Likes
Version history
Revision #:
1 of 1
Last update:
‎Dec 19, 2008 12:00 AM
Updated by:
Anonymous
 
Contributors