cancel
Showing results for 
Search instead for 
Did you mean: 

Knowledge Base Articles

Serial EEPROM last byte format

Anonymous
Not applicable

Serial EEPROM last byte format

Question: When I use the "C2 Load" format in my EEPROM, why is the last data record always set to 0x80 and 0x01?

 

Answer:

The last data record must have the MSB of its Length H byte set to 1(0x80), and the Length L byte indicates the Number of Bytes (0x01). The last operation in the C2 Load writes 0x00 to the CPUCS register, which releases the CPU from reset.

Please see section 3.4.3 of the Technical Reference Manual for additional information.

0 Likes
Version history
Revision #:
1 of 1
Last update:
‎Apr 03, 2011 06:42 AM
Updated by:
Anonymous
 
Contributors