cancel
Showing results for 
Search instead for 
Did you mean: 

Knowledge Base Articles

Reconfigure device command fails when writing to flash in CapSense Express Devices

Anonymous
Not applicable

Reconfigure device command fails when writing to flash in CapSense Express Devices

Question: Why does the Reconfigure device command fail while writing to flash in CapSense Express devices ?

 

Answer:

This happens due to a software bug in PD 5.0 when writing the commands to flash. Please ensure that the device revision for CapSense Express devices is 1B and download the PSoC Designer 5.0 SP6 from the link http://www.cypress.com/?rID=34517 which fixes this bug.

 

The device revision can be read using the following command from the Bridge Control Panel Utility:

 

w 00 a0 00 r 00 x p


The reply expected from the device is:
 

w 00+ A0+ 00+ r 00+ 1B+ p

 

Note: You'll have to reorder the samples, if the device revision is not 1B.

0 Likes
Version history
Revision #:
1 of 1
Last update:
‎Apr 01, 2009 12:00 AM
Updated by:
Anonymous
 
Contributors