cancel
Showing results for 
Search instead for 
Did you mean: 

Knowledge Base Articles

Propagation Delay Time For The CY2309

Anonymous
Not applicable

Propagation Delay Time For The CY2309

Question: What is the propagation delay time for the CY2309?

 

Answer:

The CY2309 with PLL enabled has very little propagation delay if all outputs are loaded evenly. The datasheet spec reads t6a < +/-350 ps. In bypass mode, the CY2309 bypasses the PLL and therefore acts as a normal buffer, with propagation delay (t6b) in the datasheet as
Min = 1 ns,
Typ = 5 ns,
Max = 8.7 ns.

With the PLL enabled, the part acts as a "zero delay buffer." In this mode, the PLL reduces the propagation delay from input to output compared to the bypass mode.

0 Likes
Version history
Revision #:
1 of 1
Last update:
‎Dec 19, 2008 12:00 AM
Updated by:
Anonymous
 
Contributors