Strictly necessary cookies are on by default and cannot be turned off. Functional, Performance and Tracking/targeting/sharing cookies can be turned on below based on your preferences (this banner will remain available for you to accept cookies). You may change your cookie settings by deleting cookies from your browser. Then this banner will appear again. You can learn more details about cookies HERE.
Strictly necessary (always on)
Functional, Performance and Tracking/targeting/sharing (default off)
Can I program multiple PSoC® 1 devices at the same time, and how much time does it take to program a single device?
For high-volume production it is necessary that multiple devices be programmed at the same time. It is possible to program multiple PSoC 1 devices in parallel. A range of third-party programmers is available to program multiple PSoC 1 devices simultaneously. The following table lists the programmers available from Cypress-qualified third-party vendors.
PSoC 1 is programmed using the ISSP protocol. For general information on programming a PSoC 1 device refer to the following webpage: http://www.cypress.com/node/92446. The time required to program different PSoC 1 devices depends upon the host programmer as well as the target PSoC 1 device. The following table gives the timing details of various PSoC 1 families programmed with different programmers.