Strictly necessary cookies are on by default and cannot be turned off. Functional, Performance and Tracking/targeting/sharing cookies can be turned on below based on your preferences (this banner will remain available for you to accept cookies). You may change your cookie settings by deleting cookies from your browser. Then this banner will appear again. You can learn more details about cookies HERE.
Strictly necessary (always on)
Functional, Performance and Tracking/targeting/sharing (default off)
Which platform files should be used for CYBT-353027-EVAL kit in the WICED® Studio 6.2 or later?
CYBT-353027-EVALkit includesa fully integrated and certified Bluetooth Smart Ready wireless module (CYBT-353027-01).
Make the following changes to the WICED Studio 6.2 to start using the CYBT-353027-EVAL kit platform:
Download CYBT_353027_EVAL_PLATFORM_FILES.zip attached with this KBA.
Save and extract the downloaded file in your computer.
Navigate to CYBT_353027_EVAL_PLATFORM_FILES_6_2.zip and extract to this folder. This is used for WICED 6.2; if you want to use a previous version of WICED, you can extract the zip accordingly.
Navigate to CYT_353027_EVAL_PLATFORM_FILES > platforms > CYBT_353027_EVAL and copy this folder.
Paste the folder in the WICED Studio 6.2 folder path …\ WICED-Studio-6.2\20706-A2_Bluetooth\Platforms\. Figure 1 shows the location of folder in the WICED Studio 6.2.
Navigate to CYBT_353027_EVAL_PLATFORM_FILES\Wiced-BT\tier2\brcm\libraries\lib\20703, then copy FM25Q04_sflash.a.
Paste and replace FM25Q04_sflash.a file in WICED-Studio-6.2\20706-A2_Bluetooth\Wiced-BT\tier2\brcm\libraries\lib\20703\ as shown in Figure 2. Figure 2
Include FM25Q04_sflash.a in the makefile.mk of the user’s application project. Figure 3 shows an example for the hello_sensor application project. FM25Q04_sflash.a must be included in the makefile if application firmware performs NVRAM write or read operations (a serial flash device (NVRAM) is available in the CYBT-353027-01 module).