Strictly necessary cookies are on by default and cannot be turned off. Functional, Performance and Tracking/targeting/sharing cookies can be turned on below based on your preferences (this banner will remain available for you to accept cookies). You may change your cookie settings by deleting cookies from your browser. Then this banner will appear again. You can learn more details about cookies HERE.
Strictly necessary (always on)
Functional, Performance and Tracking/targeting/sharing (default off)
Which platform files should be used for the CYBT-333032-EVAL kit in WICED® Studio 6.2.1 or later?
The CYBT-333032-EVALkit includesa fully integrated and certified Bluetoothâ Smart ready wireless module (CYBT-333032-01).
Make the following changes to WICED Studio 6.2.1 to start using the CYBT-333032-EVAL kit platform:
Download CYBT_333032_EVAL_PLATFORM_FILES.zip attached with this KBA.
Save and extract the downloaded file in your computer.
Navigate to CYT_333032_EVAL_PLATFORM_FILES > platforms. Select and copy CYBT_333032_EVAL folder.
Paste the folder in the WICED Studio 6.2.1 folder path …\ WICED-Studio-6.2\20706-A2_Bluetooth\platforms\. Figure 1 shows the location of folder in WICED Studio 6.2.1. Figure 1. Project Folder Location
Navigate to CYBT_333032_EVAL_PLATFORM_FILES\Wiced-BT\tier2\brcm\libraries\lib\20703, and copy FM25Q04_sflash.a.
Paste and replace FM25Q04_sflash.a file in …\WICED-Studio-6.2\20706-A2_Bluetooth\Wiced-BT\tier2\brcm\libraries\lib\20703\ as shown inFigure 2. Figure 2. FM25Q04_sflash.a File Location
Include FM25Q04_sflash.a in the makefile.mk of user’s application project. Figure 3 shows an example for hello_sensor application project. FM25Q04_sflash.a must be included in the make file if application firmware performs NVRAM write or read operations (a serial flash device (NVRAM) is available on the CYBT-333032-01 module). Figure 3. APP_PATCHES_AND_LIBS += FM25Q04_sflash.a
A sample make target to build a project in WICED Studio 6.2.1 for this CYBT-333032 evaluation kit is as follows: