Strictly necessary cookies are on by default and cannot be turned off. Functional, Performance and Tracking/targeting/sharing cookies can be turned on below based on your preferences (this banner will remain available for you to accept cookies). You may change your cookie settings by deleting cookies from your browser. Then this banner will appear again. You can learn more details about cookies HERE.
Strictly necessary (always on)
Functional, Performance and Tracking/targeting/sharing (default off)
Why does PSoC Creator represent Pin 1 and Pin 10 as no connections (n/c) on the 44-TQFP package for PSoC 4100S and PSoC 4100S Plus families when the datasheet shows different connections?
This is a known defect in PSoC Creator 4.2. Pin 1 and Pin 10 on the 44-TQFP package for PSoC 4100S and PSoC 4100S Plus families are incorrectly represented as no connections (n/c) in the pin editor. This defect exists in PSoC Creator 4.2 and all previous versions. The datasheet specifies the correct connections for these pins. Following are the correct connections:
PSoC 4100S (44-TQFP package):
Pin 1 - VSSD
Pin 10 - VSSD
PSoC 4100S Plus (44-TQFP package):
Pin 1 - VSSD
Pin 10 - P0
Impact: The misrepresentation of the VSSD connections does not have a functional impact on the design. Pin 10 misrepresented on PSoC 4100S Plus will have a functional impact. With this defect, you will not be able to assign and configure P6 through the pin editor. This will the addressed in the next release of PSoC Creator.