Translation - Japanese: イメージセンサーとFX2LP™のインターフェース – KBA95736 - Community Translated (JA)
The Hi-Speed USB controller FX2LP CY7C68013A can be used for image sensor applications (in vendor mode) as shown in Figure 1.
Figure 1. FX2LP Interface with Image Sensor
FX2LP Pin Descriptions:
Image Sensor Pin Descriptions
The following flowcharts provide an overview of the application:
Host Application Flowchart
FX2LP Project Flowchart
Note: 1 and 2 indicated in this flowchart are just reference points.
Note: FX2LP does not support UVC class that requires header and footer for each frame. The 8051 CPU is not fast enough to insert header and footer in between frames. Therefore, if you want to implement UVC class with FX2LP, an external FPGA must be used. The FPGA must insert the header and footer in between frames and pass the data to the FX2LP.
Refer to https://community.cypress.com/docs/DOC-14406 for an example project of UVC class implementation using FX2LP.
Create a tech support case http://www.cypress.com/support to obtain an example project.