Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob

In BYTE mode configuration, using the write buffer commands for Parallel NOR Flash, what is the value for the word count in cycle-4? - KBA203365

In BYTE mode configuration, using the write buffer commands for Parallel NOR Flash, what is the value for the word count in cycle-4? - KBA203365

Anonymous
Not applicable

Author: BushraH_91           Version: *A

Translation - Japanese: BYTEモード設定で、パラレルNORフラッシュの書き込みバッファーコマンドを使用したとき、サイクル4でのワードカウント値はいくつですか?- KBA203365 - Community Translat...

Question:

In BYTE mode configuration, using the write buffer commands for Parallel NOR Flash, what is the value for the word count in cycle-4?

Answer:

In the S29GL-P datasheet notes, in BYTE (x8) mode, the total number of cycles may be from 6 to 69 (63-bytes). In BYTE (x8) mode, there is a total of 64-bytes. Therefore, any number of write cycles from 1 to 64 will suffice. Note: the word count is actually the write count minus 1. For example, if the word count is 32, the write count to be entered in cycle-4 is 31.

0 Likes
572 Views
Contributors