cancel
Showing results for 
Search instead for 
Did you mean: 

Knowledge Base Articles

FX2LP Failed EEPROM Boot - KBA225241

chaitanyav_41
Employee

FX2LP Failed EEPROM Boot - KBA225241

Author: SananyaM_56           Version: **

Translation - Japanese: FX2LPのEEPROMブートの失敗 - KBA225241 - Community Translated (JA)

Question:

When can FX2LP EEPROM boot fail even when a valid firmware is present in the EEPROM?

Answer:

FX2LP EEPROM boot can fail when the EEPROM address lines are not strapped to a proper value based on its size. If the EEPROM has its address set as 0x50, the bootloader will expect a single byte addressable EEPROM, and if the EEPROM has its address set as 0x51, the bootloader will expect a double byte addressable EEPROM and perform the read operation accordingly. Once the read fails, FX2LP goes to “No EEPROM” scenario and enumerates in bootloader mode as the default USB device.

See the ‘Strap Boot EEPROM Address Lines to these Values’ table in the device datasheet for example EEPROMs and the corresponding address values.

0 Likes
Version history
Revision #:
1 of 1
Last update:
‎Oct 02, 2018 11:07 PM
Updated by:
 
Contributors