cancel
Showing results for 
Search instead for 
Did you mean: 

Knowledge Base Articles

Error Message: "Attached pod (000e1022) is not compatible with the selected PSoC"

Anonymous
Not applicable

Error Message: "Attached pod (000e1022) is not compatible with the selected PSoC"

Question: I get an error message " Attached pod (000e1022) is not compatible with the selected PSoC" while using the new CY8C27002-24PVXI OCD part while debugging with PSoC Designer. This is the latest revision OCD part (B 05 datecode 1001).

 

Answer:

This issue is found in PD5.0 SP6, since this latest revision part is not added in the latest version of PSoC Designer. The workaround is mentioned below.

1. Close all PSoC Designer.
2. Replace "CY8C27000DeviceDB.xml" file in "C:\Program Files\Cypress\Common\CypressSemiDeviceEditor\Devices\CY8C27000\" folder with the attached "CY8C27000DeviceDB.xml" file.
3. Open PSoC Designer
4. Under Tools menu, click on "Refresh Driver/User Module Manifest" option.
5. Try to connect device to ICE

This is fixed in PSD5.1.
Attachments
0 Likes
Version history
Revision #:
1 of 1
Last update:
‎Mar 18, 2010 04:59 PM
Updated by:
Anonymous
 
Contributors