cancel
Showing results for 
Search instead for 
Did you mean: 

Knowledge Base Articles

Drive Strength Differences Between GPIO and SIO pins in PSoC® 3/ PSoC 5LP - KBA211243

Anonymous
Not applicable

Drive Strength Differences Between GPIO and SIO pins in PSoC® 3/ PSoC 5LP - KBA211243

Version: **

Translation - Japanese: PSoC® 3/ PSoC 5LP の GPIO と SIO ピンのドライブ能力の差について - KBA211243 - Community Translated (JA)

Question:

What are the differences in drive strength between GPIO and SIO pins in PSoC 3/ PSoC 5LP?

Answer:

GPIO pins can source 4 mA and sink 8 mA whereas SIO pins can source 4 mA and sink up to 25 Ma, which can be configured in the Output section of a Pin Component as shown in the following figure. The output Component uses SIO pin if Drive Level is set to VREF or Drive Current is set to a 25-mA sink. Ensure that you assign the Port 12 pins for this purpose which has SIO function.

1.png

0 Likes
Version history
Revision #:
1 of 1
Last update:
‎Apr 05, 2016 01:51 AM
Updated by:
Anonymous
 
Contributors