cancel
Showing results for 
Search instead for 
Did you mean: 

Knowledge Base Articles

Configuring CapSense Express devices through PSoC Designer 5.1

Anonymous
Not applicable

Configuring CapSense Express devices through PSoC Designer 5.1

Translation - Japanese: PSoC Designer 5.1によるCapSense Expressデバイスの設定 - Community Translated (JA)

Question: Can I configure CapSense Express devices through PSoC Designer 5.1

Answer:

System level design is not supported in the latest versions of PSoC Designer 5.1 (PSoC Designer 5.1 onwards).

PSoC Designer 5.0 SP6 can be used to configure PSoC express devices since it supports system level design (which is a requirement for configuring PSoC Express Devices).

PSoC Designer 5.0 SP6 can be downloaded from our website through this link http://www.cypress.com/?rID=34517. Note that PSoC Designer 5.0 can co-exist with PSoC Designer 5.1. (It will co-exist with future releases of PSoC Designer also, because of system level design support).

0 Likes
Version history
Revision #:
1 of 1
Last update:
‎Mar 09, 2011 10:40 PM
Updated by:
Anonymous
 
Contributors