Can pin 19 on CY7C64613 (52-pin package) be grounded?
Anonymous
Not applicable
Nov 16, 2011
01:42 AM
- Subscribe to RSS Feed
- Mark as New
- Mark as Read
- Bookmark
- Subscribe
- Printer Friendly Page
- Report Inappropriate Content
Nov 16, 2011
01:42 AM
Question: On the 52-pin part CY7C64613, can I connect pin 19 to ground?
Answer:
This pin19 should be pulled to 3.3 volts not grounded. It is a input for factory purposes and therefore should not be floating. Pin 19 can be connected to 3.3 Volts either through a resistor or directly to 3.3 volts.
The reserve pins that are connected to ground can also be done either directly to ground or through a pull down resistor (we have done both on our boards).
Rate this article:
Contributors
-
This widget could not be displayed.Anonymous