CY3640 USB Starter Kit
Anonymous
Not applicable
Dec 19, 2008
12:00 AM
- Subscribe to RSS Feed
- Mark as New
- Mark as Read
- Bookmark
- Subscribe
- Printer Friendly Page
- Report Inappropriate Content
Dec 19, 2008
12:00 AM
Question: What is the CY3640 USB Starter Kit? What is included in the CY3640 USB Starter Kit?
Answer:
The CY3640 USB Starter Kit was designed to serve as an easily customizable platform for USB device development using Cypress' CY7C630xx/631xx USB controllers. This kit is no longer available.
The contents of the CY3640 Development kit are listed below.
Hardware:
- Three CY7C63001 Cypress USB Controller devices (One pre-programmed windowed
controller on the CY3640 USB Thermometer Demo board, and two spare devices (one
windowed and one OTP) - One Cypress USB Programmer from HI-LO Systems with a wall power adapter, a serial cable
and programming software on a floppy disk - One CY3640 USB Starter Kit printed circuit board
- One low-speed unshielded USB "A to B" Cable
- One Cypress USB Starter Kit CD-ROM
Software:
- CYASM: Cypress USB controller assembler
- USB Thermometer device assembly source code
- USB Thermometer Windows application program executable code
- USB Thermometer device driver
Soft Documentation:
- Cypress USB controller family datasheets
- USB Thermometer User's Guide and Application Note: Designing a USB Thermometer with the CY7C63001 USB Controller
- USB Thermometer PC board layout and schematics
- USB Specification v1.0
- Cypress CYASM assembler manual
- Cypress USB-related application notes
- Cypress databook
Printed documentation:
- USB Starter Kit User's Guide
- USB Starter Kit Application Note
- Registration card
Rate this article:
Contributors
-
This widget could not be displayed.Anonymous