Showing results for 
Search instead for 
Did you mean: 

Knowledge Base Articles

CY2XF32 Programming Tools

Not applicable

CY2XF32 Programming Tools

Question: What hardware and software is required to program a CY2XF32?



The required programming tools are as follows:

Hardware –
CY3675-CLKMAKER1 CyClockMaker Clock Programming Kit. This programmer connects to a USB port on your computer.
CY3675-LCC6A Clock Socket Adapter. The adapter plugs onto the CY3675-CLKMAKER board, and needs to be purchased separately since it is not included in the kit.
Alternatively, you can use programmers from qualified vendors such as BP Microsystems. We have a General Purpose Clocks Third-Party Programmer List available on our website.
You also have an option to contact your Local Sales Representatives or Distributor Channel for programming.
Software –
CyClockWizard. This software is used to enter the user requirements and generate a JEDEC format programming file.  It is also used to program the CY2XF32 when the CY3675 programmer is connected to your computer.


Documentation –

Ordering –
Your Local Sales Representatives. A list to select from your local sales person is available on our Website with their contact details. Following the link just provided you need to select your country name under “Location” and local area / state under “Area” dropdowns.
We have the convenience of our Online Cypress Store.
If the volume is large enough, you can have Factory Programmed configurations after contacting your Local Sales Representatives.


Version history
Revision #:
1 of 1
Last update:
‎Sep 18, 2009 06:13 AM
Updated by: