Attachments are accessible only for community members.
CSD wizard window is completely blank while using PD5.0 SP6
Anonymous
Not applicable
Nov 12, 2009
03:13 PM
- Subscribe to RSS Feed
- Mark as New
- Mark as Read
- Bookmark
- Subscribe
- Printer Friendly Page
- Report Inappropriate Content
Nov 12, 2009
03:13 PM
Question: I am designing my project using part CY8C21x34 in PD5.0 SP6. When I go to CSD wizard, CSD wizard is completely blank. Why is this happening and how do I fix this issue?
Answer:
This is because of a known bug in some PSoC Designer files. To fix the problem,
1. Unzip the attached Zip file to a known location with folders.
2. Open the following folder. C:\Program Files\Cypress\Common\CypressSemiDeviceEditor\Data\Stdum\CSD\
3. Rename PartNumber.xml to PartNumber.bak
4. Copy the PartNumber.xml file from the CSD folder of the unzipped folders.
5. Open the following folder. C:\Program Files\Cypress\Common\CypressSemiDeviceEditor\Data\Stdum\CSDADC\
6. Rename PartNumber.xml to PartNumber.bak
7. Copy the PartNumber.xml file from the CSDADC folder of the unzipped folders.
This problem is fixed in PD5.1 which can be downloaded from here.
Labels
Rate this article:
Contributors
-
This widget could not be displayed.Anonymous