cancel
Showing results for 
Search instead for 
Did you mean: 

Knowledge Base Articles

Buttons with Sharp Corners (less than 90 degrees) in a Self-Capacitance Button Design - KBA229184

ChaitanyaV_61
Employee

Buttons with Sharp Corners (less than 90 degrees) in a Self-Capacitance Button Design - KBA229184

Author: LinglingG_46         Version: **

Translation - Japanese: 自己容量方式のボタンデザインでの、鋭角形状(90度未満)のボタンについて-KBA229184 - Community Translated (JA)

Question:

Are buttons with sharp corners (less than 90º) acceptable for a self-capacitance button design?

Answer:

Yes. Buttons with sharp corners are acceptable and works in most common designs. However, these buttons are not recommended as the design impacts capacitance sensing performance:

1. The corner can be equivalent to the capacitive load on the transmission line.

2. The discontinuity of impedance will cause the reflection of signal.

3. The sharp corners will cause EMI, which might cause high speed signal problems.

References:

0 Likes
Version history
Revision #:
1 of 1
Last update:
‎Dec 08, 2019 11:51 PM
Updated by:
 
Contributors