cancel
Showing results for 
Search instead for 
Did you mean: 

Knowledge Base Articles

AutoStore Operation in nvSRAM Devices - KBA232809

ArunKumarChoul
Employee

AutoStore Operation in nvSRAM Devices - KBA232809

Version: **

Question: Is there a potential for the AUTOSTORE cycle to be interrupted if a brownout occurs between 25 ns – 8 ms and will a potential data loss occur?

Answer:

AutoStore operation will be uninterrupted if the power provided by the AutoStore capacitor connected to the VCAP pin matches the datasheet specifications; hence there is no potential for data loss. For details about nvsRAM features, refer to the specific device datasheet.

The device will complete the ongoing AutoStore cycle and initiate power-up RECALL process even if it is interrupted by power-up cycle. When the voltage on the VCC pin drops below VSWITCH during power-down, the device automatically performs AutoStore operation using the voltage from the VCAP capacitor. Note that the AutoStore operation is initiated only if a Write operation has been performed since the last STORE operation (see Figure 1).

Figure 1. AutoStore or Power-Up Recall

fig-1.png

0 Likes
Version history
Revision #:
1 of 1
Last update:
‎Jul 28, 2021 11:37 PM
Updated by:
 
Contributors