Microcontrollers Forum Discussions
Browse the Community
PSoC™ 6
Discussion forum regarding PSoC™ 6 - 32-bit Arm Microcontroller (MCU) Forum, discusses the 40-nm technology - best combination of ultra-low-power consumption, flexibility, security and high-performance topics.
PSoC™ 4
PSoC™ 4 - Arm®-based Forum, discusses the low-power Cortex®-M0 and Cortex®-M0+ cores, CapSense®, and Bluetooth® Low Energy
PSoC™ 5, 3 & 1
The PSoC™ 5LP, PSoC 2 and PSoC 1 Forum discusses - 24-bit Digital Filter Block (DFB), 24 UDBs, DMA controller and integrating AFE, digital logic with user interface ICs with an Arm Cortex-M3 CPU solutions.
CAPSENSE™ & MagSense
The Sensing Technology Forum discusses CAPSENSE™ - capacitive-sensing and MagSense inductive-sensing for consumer, industrial, automotive, and Internet of Things (IoT) applications.
XMC™
AURIX™
In this forum you can post your questions, comments and feedback about the 32-bit AURIX™ TriCore™ Microcontroller. The AURIX™ offers the highest scalability in performance, memory & peripherals across application. It is a safe and secure companion chip, meeting both the ISO functional safety standards and EVITA full security standards. Here you can also find the links to the latest board pages, SW and Tools GitHub, trainings, documents and FAQs
TRAVEO™ T2G
Discussion forum regarding 32-bit TRAVEO™ T2G Microcontroller - based on ARM® for automotive body electronics applications; cutting-edge performance, safety, and security features topics.
MOTIX™ MCU
The MOTIX™ MCU forum is designed for you to post your questions, comments and feedback about the famous Embedded Power ICs at anytime. Ask your technical questions or explore existing content!
Legacy microcontrollers
Featured Discussions
in TC38x,Can the local memory unit(LMU) and thre Distributed LMU (DLMU) as a whole LMU to be used in OVC function SAL-TC387QP-160F300S AD
Show Less你好
目前使用"UART_VCOM_1_KIT_TC397_TFT"範例在Triboard TC397上進行測試。
開啟兩組ASCLIN 模組0跟模組4並且在中斷設置中有更改相對應的向量表數值,進行以下交互測試:
1. CPU0_Main.c內執行兩組ASCLIN初始化、只有調整"中斷向量表數值(0)"跟進行輸出"Hello World!" ==> 可以正常顯示
2. CPU1_Main.c內執行兩組ASCLIN初始化、只有調整"中斷向量表數值(1)"跟進行輸出"Hello World!" ==> 無法顯示
3. CPU2_Main.c內執行兩組ASCLIN初始化、只有調整"中斷向量表數值(2)"跟進行輸出"Hello World!" ==> 可以正常顯示
4. CPU3_Main.c內執行兩組ASCLIN初始化、只有調整"中斷向量表數值(3)"跟進行輸出"Hello World!" ==> 可以正常顯示
想請問為何在CPU1_Main.c會有此問題?
#AURIX
#Tricore
Show Less
when try to debug the example project through miniwiggler, it can not work as below:
but memtool can connect the chip :
MCD basic client can also connect the chip and get the information:
the ADS version is 1.9.20 ,DAS version is 8.0, miniwiggler is V3.1, hardware board is designed by other people and can be connected through UDE/pls
Show Less
Dear Forum:
I know that
The Hex file generated by the Modus Tool box IDE follows the Intel Hex File format which is supported by the Cypress Programmer.
from the following title.
https://community.infineon.com/t5/PSoC-6/PSoC-programmer-parsing-failure/td-p/716946
I want to confirm that
Which IDE can generate hex file used by PSoC programmer?
Thank you.
Show LessDear team need to understand why the upper limit for overtemperature is locked?
Also please confirm if there is any sample code for handling overtemperature
Show Less
Dear Team,
I am using the sequencer for analog input reading, just want to know what is difference between interrupt method and sequencer method for ADC1 reading?
Show Less Hello, I need your help. Thank you very much
It is normal for the program to jump from the boot area to the app area, but after jumping from the app area to the boot area, the program in the app area does not run normally, and it is looping in one place. The program keeps looping at 0x00C00090.
Now it is certain that the jump instruction is no problem, the program has jumped to the boot area, before jumping I have closed the interrupt. Or provide some code about software reset, I tried software reset, but it failed, maybe my instructions are not correct.
In the end, the target array is still all zeros
smartconx_target@Q!w2e3r4t5y6u7i8o9p0||/t5/TRAVEO-T2G/cyt4fbb7-%E4%BD%BF%E7%94%A8mdma%E5%A4%8D%E5%88%B6%E6%95%B0%E7%BB%84%E6%B2%A1%E6%9C%89%E6%88%90%E5%8A%9F%E6%98%AF%E4%B8%BA%E4%BB%80%E4%B9%88/td-p/724114
Show LessHi All,
I have a question related to SCR_XRam and SCR_IRam.
The question: How to know whether the SCR_XRam and SCR_IRam are initialized or are not initialized in startup code?
Thanks.
Show Less-
TraveoII
UART buadrate Setting
by chandan1995 Jun 19, 2023