cancel
Showing results for 
Search instead for 
Did you mean: 

FM0+, FM3 & FM4 MCU

gifoc_3108571
New Contributor

Hi

I need to program the micro MB9BF418TPMC with batch files, but I can't find anything that can help me, I didn't find any shell ..
Can you help me?
Thank you
Greetings

0 Likes
1 Solution
HolgerW_56
Employee

Hi,

you can use the Cypress Programmer "FLASH MCU Programmer for FM0+/FM3/FM4 (FLASH)"

http://www.cypress.com/documentation/software-and-drivers/flash-mcu-programmer-1

as follows by command line:

Example:

flash "MB9BF418S/T" 4MHz test.mhx COM37 dialog

Define the right device name (copy&paste it from the chipdef.ini)

Define the crystal frequency

Define your filename

Define the right COM port

Option "dialog" displays the progress display window, or "no_dialog"

The result is reported within the file MESSFILE.TXT.

If programming was successfull, the file content shows "OK", otherwise "NG" and a short problem description is given.

Alternatively you can have a look to the 3rd party tool FLASHly, www.holgerium.de/elektronik -> flashly,

that allows programming of your device by command line, too.

Kindest regards.

View solution in original post

1 Reply
HolgerW_56
Employee

Hi,

you can use the Cypress Programmer "FLASH MCU Programmer for FM0+/FM3/FM4 (FLASH)"

http://www.cypress.com/documentation/software-and-drivers/flash-mcu-programmer-1

as follows by command line:

Example:

flash "MB9BF418S/T" 4MHz test.mhx COM37 dialog

Define the right device name (copy&paste it from the chipdef.ini)

Define the crystal frequency

Define your filename

Define the right COM port

Option "dialog" displays the progress display window, or "no_dialog"

The result is reported within the file MESSFILE.TXT.

If programming was successfull, the file content shows "OK", otherwise "NG" and a short problem description is given.

Alternatively you can have a look to the 3rd party tool FLASHly, www.holgerium.de/elektronik -> flashly,

that allows programming of your device by command line, too.

Kindest regards.

View solution in original post

Top labels