Community Translation - Actual IDAC Current Value of PSoC 4 CapSense - KBA229074

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
taas_3144281
Level 5
Level 5
Distributor - Marubun (Japan)
25 sign-ins 50 replies posted 25 replies posted

Hi,

I tried to translate this KBA229074 into Japanese.

Actual IDAC Current Value of PSoC 4 CapSense - KBA229074

----------------------------------

タイトル:PSoC 4 CapSense の実際の IDAC 電流値 - KBA229074

内容:

PSoC の IDAC(μA)の電流値は次の式で計算することができます。

IDAC_Current_Value  =  IDAC_Gain × IDAC

ここで、IDAC_Gain は IDAC 電流値( nA または µA 単位)の最下位ビットであり、IDAC はファームウェアで設定された変調IDAC または補正IDAC(補正IDAC が有効な場合)の値です。

IDAC 自動調整が無効になっている場合、CapSenseコンポーネント GUI でこれら2つの IDACパラメーターに適切な値を設定できます。IDAC自動キャリブレーションが有効な場合、CapSense はこれら2つの IDAC に適切な値を自動的にキャリブレーションします。

pastedImage_0.png

IDAC_Gain は CSDv1 場合、1.2 µA /bit(デフォルト)または2.4 µA /bit に設定できます。CSDv2 の場合は、2.4 µA /bit、300 nA /bit、または37.5 nA /bit に設定できます。

下記は計算例になります。IDAC_Gain が2.4 µA /bit、変調器IDAC が11、補正IDAC が9であると想定します。理想的な実際の IDAC電流値は次のとおりです。

  • 実際の変調器IDAC 電流値= 2.4 µA /bit×11= 26.4 µA
  • 実際の補償IDAC の電流値=2.4 µA /bit×9 = 21.6 µA

PSoC 4 IDAC にはフルスケールで±10%の誤差があることに注意してください。実際のアプリケーションでは、このエラーを考慮する必要があります。

詳細については、サイプレスコミュニティにアクセスするか、サイプレスセールスにお問い合わせください。

参照:

PSoC 4 Capacitive Sensing (CapSense®)
AN85951 - PSoC® 4 and PSoC® 6 MCU CapSense® Design Guide
32-bit Arm® Cortex®-M0 PSoC® 4

-----------------------------------

Best Regards,

Asanuma

0 Likes
1 Reply
JennaJo
Moderator
Moderator
Moderator
1000 replies posted 750 replies posted 500 replies posted

Hello,Asanuma-san

We receive your translation, it will be published to KBA to Community.

After upload, You will receive the points as the word of KBA.

Due to the current delay of internal review, Please bear with me for the delayed the response.

It could be delayed, but it will be processed soon.

Thanks for your contribution to CDC!

Will keep you update the status.

Thanks,

Jenna Jo

Jenna Jo