cancel
Showing results for 
Search instead for 
Did you mean: 

Clocks

Anonymous
Not applicable

Does the CY2304NZ output tristate when OE is low?  That's normally how OE works on a part, but the datasheets says the outputs just go low.

0 Likes
1 Solution
PradiptaB_11
Moderator
Moderator

Hi Thomas,

The CY2304NZ has a active high OE. When it is high the outputs will be enabled and follow the BUF_IN input. When OE is low the outputs will be low as the datasheet shows.

Thanks and Regards,

Pradipta.

View solution in original post

0 Likes
2 Replies
PradiptaB_11
Moderator
Moderator

Hi Thomas,

The CY2304NZ has a active high OE. When it is high the outputs will be enabled and follow the BUF_IN input. When OE is low the outputs will be low as the datasheet shows.

Thanks and Regards,

Pradipta.

View solution in original post

0 Likes
Anonymous
Not applicable

Actually I've confirmed elsewhere that the outputs are -not- tristated when OE goes low. The outputs just go to a logic low state when OE is low.

This is not how I would normally expect the OE pin to operate. Nevertheless that's how it works with this part.

0 Likes