cancel
Showing results for 
Search instead for 
Did you mean: 

Clocks

New Contributor

Hello all,

What is the CY2302 Loop filter Bandwidth?

Can I use it for jitter attenuation application?

Thanks

Nir

0 Likes
Reply
1 Solution
Moderator
Moderator

Hi

The loop bandwidth is roughly about 100 KHz. As it is a public forum cannot share the exact number but you can use the mentioned value for all practical purposes.

As far as using it for Jitter attenuation go you will need to check the jitter which is already present in inside the bandwidth as that will be amplified. So if it is within the range for your application they you can use it for cleaning jitter.

Thanks,

Pradipta.

View solution in original post

0 Likes
Reply
2 Replies
Moderator
Moderator

Hi

The loop bandwidth is roughly about 100 KHz. As it is a public forum cannot share the exact number but you can use the mentioned value for all practical purposes.

As far as using it for Jitter attenuation go you will need to check the jitter which is already present in inside the bandwidth as that will be amplified. So if it is within the range for your application they you can use it for cleaning jitter.

Thanks,

Pradipta.

View solution in original post

0 Likes
Reply
New Contributor

Thanks Pradipta.

Nir

0 Likes
Reply