Featured Discussions
How to interpret the .npy files that we get in the Radar Fusion GUI. I used the np.load to load the contents of the array( image attached below), but i am not able to understand what the contents are? Is the contents of .npy file same as .raw.bin files that we used to get earlier or it is similar to .txt files
Show Less
Hello,
is there a limit to the number of cycles I can reflow solder the BGS14M8U9?
We place our components in a two stage workflow with the BGS14M8U9 being the first component in the PCB. Can it endure another solder cycle or does this have any impact on the product?
Best regards
Show LessHi,
I am having the Traveo-T2G kit. CYTVII-2D-4M-216 set and the CYT3DLABHBES cpu.
I am running the TRAVEO T2G Sample driver Library provided by infineon.
Is freeRTOS supported for this MCU ?. Because when running the example of freertos from "tviic2d4m". I am getting error ike the FreeRTOS.h was not found. Then I found that the freeRTOS path is not included in the workspace. Can I add manually?.
*Note: In the IAR workspace tviic2d4m_flash_cm7_0_mc_template -> the RTOS folder is excluded from build.
In the "TLE6208-3G" Application Note, Rev. 1.0, July 2004, on page 20, in the description of the "Status Word" section, regarding "Bit 0: Overtemperature Prewarning," it is understood that when the chip temperature falls below the standard value (Ti=125°C), bit 0 is set to L to update the abnormal bit based on the IC's own temperature judgment.
Therefore, it is correct to understand that for "Bit 13: Overload/Short-Circuit Indicator," "Bit 14: Underload/Broken Wire Indicator," and "Bit 15: Supply Voltage Fault," when the abnormal condition is resolved, the abnormal bit is not automatically cleared, but by using the SRR register, the abnormal bit can be set to 0.
Show Lesssmartconx_target@Q!w2e3r4t5y6u7i8o9p0||/t5/AURIX/TC-397-HSM-%E7%94%A8%E6%88%B7%E5%BC%80%E5%8F%91%E6%8C%87%E5%8D%97/td-p/716773
Show LessHello,
I am trying to connect Infineon Miniwiggler v3 to the Aurix Tc387, by using Infineon Memtool 2021.8.
But couldn't able to establish the connection between them.
Need support related to Memtool Settings and need details for DAP Miniwiggler v3.
Please support!!
Show LessHello Team
Part Number : IRLML6402TRPBF
I need RoHS, REACH documentation for that part.
I would like to receive a link to receive the materials or a reply by email.