Featured Discussions
Hi,
I am having the Traveo-T2G kit. CYTVII-2D-4M-216 set and the CYT3DLABHBES cpu.
I am running the TRAVEO T2G Sample driver Library provided by infineon.
Is freeRTOS supported for this MCU ?. Because when running the example of freertos from "tviic2d4m". I am getting error ike the FreeRTOS.h was not found. Then I found that the freeRTOS path is not included in the workspace. Can I add manually?.
Show LessIn the "TLE6208-3G" Application Note, Rev. 1.0, July 2004, on page 20, in the description of the "Status Word" section, regarding "Bit 0: Overtemperature Prewarning," it is understood that when the chip temperature falls below the standard value (Ti=125°C), bit 0 is set to L to update the abnormal bit based on the IC's own temperature judgment.
Therefore, it is correct to understand that for "Bit 13: Overload/Short-Circuit Indicator," "Bit 14: Underload/Broken Wire Indicator," and "Bit 15: Supply Voltage Fault," when the abnormal condition is resolved, the abnormal bit is not automatically cleared, but by using the SRR register, the abnormal bit can be set to 0.
Show Lesssmartconx_target@Q!w2e3r4t5y6u7i8o9p0||/t5/AURIX/TC-397-HSM-%E7%94%A8%E6%88%B7%E5%BC%80%E5%8F%91%E6%8C%87%E5%8D%97/td-p/716773
Show LessHello,
I am trying to connect Infineon Miniwiggler v3 to the Aurix Tc387, by using Infineon Memtool 2021.8.
But couldn't able to establish the connection between them.
Need support related to Memtool Settings and need details for DAP Miniwiggler v3.
Please support!!
Show LessHello Team
Part Number : IRLML6402TRPBF
I need RoHS, REACH documentation for that part.
I would like to receive a link to receive the materials or a reply by email.
Hi, guys:
I modified AN89056_FLASH from AN89056 sample code and tried to run on PSoC4100S+256K (CY8C4148AZQ-S455). But I got error message as following:
Test Counter = 007E
Error: FLASH
FLASH CHECKSUM: D6117B4D252189BB
The test failed always on test counter 007E. But I don't understand why since it is successful between test counter 00 to 7D. Can anyone help on what's wrong.
BR, Maurice
Show LessI am using the chip cyble222014 to test Bluetooth communication, currently using mini program4 5pin port to program but it says Psoc device is not acquired, I have carefully checked the connection everywhere, so anyone understand how it is,what is wrong, thank you very much
Show Less