Featured Discussions
text.format{('custom.tabs.no.results')}
Dear Supporter
I want to translate the following KBA. Please confirm to my work.
General layout considerations for MOSFETs
General layout considerations for MOSFETs - Infineon Developer Community
Regards,
AkUm
Show LessDear Supporter
I want to translate the following KBA. Please confirm to my work.
Temperature dependency of MOSFET parasitic capacitances and losses
Temperature dependency of MOSFET parasitic capacit... - Infineon Developer Community
Regards,
AkUm
Show LessHi All,
I am kind of new to Radar sensor technology.
I tried to go through the DS of the BGT60TR13CT radar sensor but couldn't really understand what sort of Data I would be receiving over the SPI protocol. My use case is, I want to interface the sensor with a 3rd party microcontroller, to read and process the raw data that I'll be receiving, so that I can classify target present and target not present states.
Could somebody please guide me regarding what sort of data frame I would be receiving and how to process the same, for my use case.
Thanks and regards,
Sabyasachi.
#BGT60TR13CT
Show Less
Hi,
I want to translate the following article. Please confirm to my work.
URL: https://community.infineon.com/t5/Knowledge-Base-Articles/How-can-uIO-Stick-user-program-readout-into-from-data-flash-area/ta-p/683553
Best Regards
Show LessHi,
I want to translate the following article. Please confirm to my work.
URL: https://community.infineon.com/t5/Knowledge-Base-Articles/How-to-Renew-MOTIX-TLE987x-Motor-Control-F...
Best Regards
Show Less
we are trying to re flash the Micro Via MODUS tool .it is getting heat while flashing after 60% completed. and our tool shows power interrupt .
Error Image from our flashing tool:
please support to resolve this issue. we are struggling to Re flash the Micro . kindly share your input to resolve the issue.
Show LessHi,
I want to translate the following article. Please confirm to my work.
URL: https://community.infineon.com/t5/Knowledge-Base-Articles/How-to-Renew-MOTIX-TLE987x-Motor-Control-FOC-Demo-License/ta-p/682109
Best Regards
Show LessHi,
I want to translate the following article. Please confirm to my work.
URL: https://community.infineon.com/t5/Knowledge-Base-Articles/Can-a-single-ceramic-cap-be-used-for-VDDP-and-VDDC-outputs-in-TLE9844/ta-p/682100
Best Regards
Show LessHi,
Does this controller have a internal temperature sensor? I would like to clarify this because the CCG3 Tecnical Reference manual says
The 8-bit ADC is used for generic voltage sensing of anything connected to the analog mux (AMUX buses, as well as voltage supply measurement and temperature sensing.
Also SDK has some references to ADC temperature sensing.
/*
* ADC1 SAR Control Register
* General Purpose voltgae measurement, Temperature Sceining
*/
#define PDSS_ADC1_SAR_CTRL_ADDRESS (0x400a01a0)
#define PDSS_ADC1_SAR_CTRL (*(volatile uint32_t *)(0x400a01a0))
#define PDSS_ADC1_SAR_CTRL_DEFAULT (0x00008000)
Is there a internal sensor or are these just referring to a some external sensor like NTC thermistor connected to a pin and muxed to ADC?
Thanks!